Windows Update Error 8024402f: Try Out Some Effective Fixes

Basically, the error 8024402F is an update error. Most of the users notice it when they are trying to update their version of Windows manually. The bad connection is the main cause behind the error. It arises when the connection between the computer and the Windows Update servers is interrupted. In order to fix the issue, Microsoft has released an official patch. So, you can easily fix it with the Windows Update troubleshooter. But sometimes, the patch does not affect this issue.

So, if you are constantly facing the Windows update error 8024402f, what are you supposed to do? Obviously, this issue strikes your computer very badly. But, there is no need to be low since you are not the only one facing it. This is one of the common error which can be resolved promptly. We have given out some common causes and an exhaustive list of hacks on “how to fix the error 8024402f?” Now, go through the whole article and apply the steps properly.

The Most Common Causes of Encountering the Windows Update Error 8024402f

Commonly the error appears while checking for updates or if there is a break in the connection between your computer and the Windows Update Server. As a result, you are unable to connect to the internet through Internet Explorer and unable to install updates. The error code 8024402F is probably an issue connecting to the Windows Update Servers. Some other reasons are listed below:

• Software like anti-spyware, proxy servers, firewalls, anti-spyware.

• Slow internet connection

• Conflict on system level

• Corrupt Windows update components

The Effective Fix: Windows could not search for new updates 8024402f

In this section, we will be guiding you the effective solutions to get rid of the error. Therefore, you can look at each and every method attentively to fix Windows update error code 8024402f.

Method 1: Check Update Logs

To check update logs, go through the following steps:

1. First of all, tap and hold the Start key and the letter R from the keyboard.
2. Then, in the Run dialogue box, write down ‘windowsupdate.log’ and tap on the OK button to continue.
3. Now, a window will come on the computer screen. After that, check the Date and Time in the window.
4. After that, tap the Windows button and then write down ‘cmd’ on the Search Panel and right-click on it.
5. Next, select the option ‘Run As Administrator’.
6. Then, type ‘dism /online /add-package /packagepath:C:\update\myupdate.cab’ and hit the ‘Enter’ key from the keyboard.

Method 2: Update the Time Settings

To update the time settings, go to the following steps:

1. First of all, click the Start key and choose the Control Panel section from the left pane.
2. Next, choose the Clock, Language and Region option and then choose Set the Time and Date.
3. Then, select Internet Time and Change Settings too.
4. After that, also select Update Now and then click on the OK button.
5. Finally, tap on Apply and then press OK. Then, check the issue once if it is solved. If not, then go to the following instructions.

Method 3: Changing Windows Update Settings

To change the Windows update settings on your computer, head over to the following steps:

For Windows 8 and 8.1

1. At first, select the Start symbol on the computer. Then, tap on Settings from the menu.
2. After that, choose PC Settings and further, you should select the Update and Recovery section.
3. Now, tap on the ‘Choose how updates get installed’ option.
4. Then, remove the check mark from “Give me recommended updates the same way I receive important updates” and put the tick mark beside the box which is saying “Give me for other Microsoft products when I update Windows” and close the window.

For Windows 7

1. First, press and hold the Windows key and then go to the Search Panel, write ‘Windows Update’ there and hit the ‘Enter’ key.
2. On the Windows Update window, choose Change Settings.
3. Now, remove the tick mark beside the box “Give me recommended updates the same way I receive important updates” and put the tick mark in “Give me updates for other Microsoft when I update Windows”. Once done, close the Window.

Method 4: Disabling Windows Firewall

To turn off the Windows firewall, go to the following steps:

1. First of all, click and hold Windows key and X at the same time. Then select Control panel on Windows 10, 8 and 8.1. For Windows 7, go to the Start menu and choose control panel.
2. Then, tap on the ‘System and security’ and ‘Windows Firewall’ too.
3. Next, tap on the Turn Windows Firewall on or off.
4. After that, choose the option disable Windows Firewall from Private Network Settings and Public Network Settings both. And then, select OK. now you can figure out the issue.

Method 5: Checking Windows Update Services

To check the Windows update services, go through the steps:

1. First of all, press the Windows key and letter R from the keyboard.
2. Now, on the Run command box type ‘msc’ and press the Enter key from the keyboard.
3. After that, select Windows Update and click on it twice.
4. Then, choose the General Tab and change the Startup Type to Automatic.
5. Now, select the Start key from the section Service Status.
6. Next, in the Service Status window, select the Background Intelligent Transfer Service.
7. After that, select General and change the Startup Type to Automatic. And finally, you can check the issue is solved.

Method 6: Renaming SoftwareDistribution folder

To rename the software distribution folder, go through the steps:

1. Press the ‘Windows’ key and the letter ‘X’ from the keyboard and choose ‘Command Prompt(Admin)’.
2. After that, select the ‘Windows’ and then type ‘cmd’ on the ‘Search Panel’ and press the ‘Enter’ key from the keyboard.  
3. Now, on the ‘Command Prompt’ type ‘WuAuServ’ and press the ‘Enter’ key.
4. Next, press the ‘Start’ key and the letter ‘R’ from the keyboard and then on the ‘Run’ box type ‘%win%’ and press ‘Enter’ key.
5. Then, find the option ‘SoftwareDistribution’ and give a right-mouse click on it.
6. After that, select the option ‘Rename’ and type ‘SoftwareDistribution.old’ and then press the ‘Enter’ key.
7. Again on the ‘Command Prompt’ type ‘WuAuServ’ and press the ‘Enter’ key from the keyboard.

Method 7: Troubleshooting the Network

To troubleshoot the network, go through the steps mentioned below:

For Windows 7

1. Select the Windows symbol, then choose Control Panel from the left column.
2. Then, select the Network and Internet option by tapping on it.
3. After that, choose the Network and Sharing Center option.
4. Next, select the option saying “Fix a network problem” and follow the on-screen instructions.

For Windows 8 and 8.1

1. At first, open the Control Panel on your computer.
2. Then, select Network and Internet, and then, click on the View network status and tasks option.
3. After that, choose “Troubleshoot problems to open the built-in Network and Internet Troubleshooter” to fix the issue.

For Windows 10

1. Press Start and S from the keyboard.
2. Then, write down ‘Network Troubleshooter’.
3. After that, choose, detect and fix the network related issues.

After doing this process, you have to check the issue once. If you do not resolve it, then you can disable the VPN and proxy connection on your computer.

Method 8: Disabling the VPN And Proxy Connection on your computer

To disable the VPN and proxy connection on your computer go through the steps:

For Proxy Connection

1. Press the Windows key from your keyboard.
2. Then, in the Search Panel, type “Internet Options” and press the Enter key from the keyboard.
3. Next, go to the tab Connections and then select LAN Settings.
4. After that, uncheck the ‘Use a proxy server for your LAN’ option.
5. Finally, click on OK to make the changes.

For VPN

1. Press the Start key and then, select the Control Panel from the left column.
2. Then, select the Network and Sharing Center option.
3. After that, click on Change Adapter Settings in the left pane.
4. Finally, find the VPN and right-click on it to delete it from your computer.

Method 10: Run the SFC Scan

To run the SFC scan, go to the following steps:

1. Press the Windows key from the keyboard and then, type ‘cmd’ in the Search Panel.
2. Then, right-click and select the option Command Prompt.
3. Next, type ‘sfc/scannow’ and press the Enter key from the keyboard.

Final Recommendation

Hope that this article is helpful to you. You can solve Windows update error 8024402f easily by applying any of the above procedure. If none of the solutions work out, we recommend you to leave feedback in the comments section below.